Airsoft Glock: description and specifications

Table of contents:

Airsoft Glock: description and specifications
Airsoft Glock: description and specifications

Video: Airsoft Glock: description and specifications

Video: Airsoft Glock: description and specifications
Video: Top 10 Best Airsoft Glocks: Ultimate Guide - RedWolf Airsoft RWTV 2024, December
Anonim

Specially for fans of tactical war games, special rifle units have been created, the shells of which do not have damaging properties. For commercial purposes, such models are created on the basis of real combat samples. One of the most recognizable is the Austrian-made Glock pistol. The airsoft version of this weapon, judging by the numerous reviews, is very popular. This product has appeared on the market relatively recently. You will learn more about what the Glock airsoft gun is from this article.

bolt carrier
bolt carrier

Introduction to the rifle unit

Airsoft Glock is produced by the Taiwanese arms company WE Metal Green Gas and the Chinese company Cyma. The line of non-combat pistols is represented by models No. 17, 18 and 19. According to the owners, these samples are very successful copies of Austrian weapons. Airsoft "Glock" outwardly differs from the prototype only in the changed inscriptions on the body. Full view of the non-combat modelidentical to analogue.

Austrian combat pistol
Austrian combat pistol

Glock 17

Airsoft gun is used as a primary or secondary weapon in tactical war games. If we compare this model with other "pneumatics", then the "Glock" No. 17 is less traumatic. The fact is that he shoots plastic balls. Thanks to this, the scope of application is not limited exclusively to airsoft. You can also use the weapon for entertaining bottle shooting.

Description

For the manufacture of the case, impact-resistant plastic is used, for the bolt casing, barrel and main components - metal alloys. Judging by the reviews of the owners, if you drop the Glock airsoft gun on a hard surface, it does not deform. This is possible thanks to the competent combination of polymers and metal.

"Pneumat" has a single type of descent: to make a shot, the owner will have to cock it first. This model is equipped with automatic and non-automatic fuses. The front and rear sights are used as sighting devices. If the owner has a desire, he can equip the pistol with an additional underbarrel laser designator. Structurally, the barrel consists of an outer casing and a brass liner. The purpose of the casing is to imitate the dimensions of a combat counterpart. To ensure the most realistic action of the shutter, the return spring is mounted on a metal axle.

glock 17 airsoft
glock 17 airsoft

How does it work?

Pistol automatics actuated under pressurenatural gas Green gas, which is characterized by a high propane content. In order for the pressure to recover faster after the shot, the developers reduced the concentration of heavy components. In addition, less volatile butane is used in this gas. According to the owners of these airsoft guns, one charge will be enough to shoot three clips loaded with balls. With the help of the shutter, the projectile is sent into the barrel channel and the trigger is cocked. The bolt itself has to be manually cocked each time before firing. If you press the entire area on the trigger with your finger, the automatic fuse will turn off.

How to disassemble?

The “pneumat” is being dismantled in several stages. First, the magazine is removed and the bolt is cocked. Next, the latches must be pressed down and the shutter casing dismantled. To do this, he is moved forward. Then you need to remove the hop-up mechanism and the brass barrel. Experts advise not to disassemble the gun yourself. Especially if you have to deal with the most critical nodes in the design. For this, there are special service centers where they hand over their weapons when they need to replace broken or worn parts.

TTX

Airsoft Glock 17 has the following performance characteristics:

  • Caliber - 6 mm.
  • The gun weighs 760 g.
  • Total length is 20.2 cm, metal barrel is 9.7 cm.
  • There are 28 balls in a clip.
  • The fired projectile flies at a speed of 90 m/s.
  • Weapons with power less than 1J.

About the advantages and disadvantages

Judging by the reviews, this “pneumat” has the following strengths:

  • Moving parts are interconnected very well, so there is no backlash in the design.
  • Automation works very reliably.
  • Outwardly, the weapon looks very stylish.

The disadvantage of model 17 is that the shooter cannot adjust the scope. In addition, the clip release button in the pistol is very large. It can be accidentally hooked, causing the magazine to fall out of the pistol.

About the Chinese “pneumatic”

The Cyma Glock Airsoft is equipped with a NiMH 7, 2500 mAh battery, which is used as a power source. The muzzle energy indicator has been increased to 1.7 J. The store holds 28 plastic 6 mm balls. The projectile moves towards the target at a speed of 70 m/s. The gun is black in color and made of ABS plastic and a metal hyperbox. Additional sights on the pistol can be installed using the Picattini or Weaver underbarrel rails. The total length of the "pneumat" is 20 cm, the barrel - 9.7 cm. The rifle unit weighs 600 g. Like the "Glock-17", this "pneumat" with the "blowback" system. Its task is to simulate recoil, namely the movement of the shutter during reloading and shift the aiming point. When the shooting is over, the shutter becomes on delay. Comes with spare clip, battery, charger, shooting balls and instruction manual.

glock airsoft gun
glock airsoft gun

Model 19

This airsoft "Glock" is equipped with 6 mm plastic balls in the amount of 19 pieces. For attaching external devices, the weapon was equipped with a dovetail underbarrel. The fired projectile develops a speed of 110 m/s.

glock airsoft gun
glock airsoft gun

Pistol with automatic safety. The indicator of the effective combat range is 25 m, the maximum is up to 40 m. The Glock weighs 720 g. It shoots single shots. This model is produced by WE.

Recommended: