How to install the scope? Adviсe

2024 Author: Henry Conors | [email protected]. Last modified: 2024-02-12 02:54

Many novice hunters are interested in how to properly set the scope. An optical sight is a device that is installed on various types of weapons for the most accurate aiming at the target. Also, this device is used to observe the object from a long distance. Accuracy and stability of shooting largely depend on the correct installation of optics.

Model selection

When choosing a sight, you need to take into account such factors as: aiming mark, magnification, adjustment complexity, diameter, lens material, mounting rings, manufacturer, cost. At the first purchase, you need to consult an experienced hunter or get advice from a seller in a weapons store. Of great importance is the quality and optimal height of the rings. An alternative option is to install a monoblock. This is a special design with fixed rings.

Installing the scope

You can entrust the installation of an optical sight to a professional gunsmith or do it yourself. This process is not particularly difficult, but requires certain skills. Before installing the sight, check the position of the fuse andmake sure the weapon is unloaded. Then it is rigidly fixed in a special machine, degreased and rubbed with gun oil.

Action algorithm

To mount the sight, you need to put the mounting rings on the rails. To do this, you need to choose the optimal position for them. Remove their upper part, install the sight and reconnect the rings. Adjust the scope, position and fix with screws on the rings.

They can be treated with a thread lock so that they do not scroll. Tighten the screws crosswise, firmly, but carefully. After all, with excessive force, you can damage the sight tube. It is better to use a torque screwdriver. After installing the sight, the weapon is sighted. To do this, you need a sighting machine.

Care Tips

The optical sight is not often used. But this does not mean that it does not require care. The sight is stored and carried in a protective cap. It is necessary to avoid shocks and shocks of the aiming tube. No need to touch the lens surface. You can not wipe them with a regular cloth. They are cleaned only with special lint-free swabs and soft squirrel brushes. For high recoil it is better to use rubber eyecups. By following these recommendations, you can significantly increase the life of the optical sight.