All chainsaws from the manufacturer "Shtil" have two-stroke engines. Their cold start is carried out according to a similar algorithm. However, on sale you can find models that have additional equipment, with which you can start the saw without much effort. For this reason, the starting technique may differ.
Algorithm for setting the Stihl 180 saw
If you are faced with the question of how to start the Stihl chainsaw, then this process can be considered using the model 180 as an example. In order to carry out cold work, you must turn on the ignition and set the engine control lever to the lower position. In this case, the carburetor damper will block the air from the filter, and the throttle will be open, so the fuel mixture will be enriched.
The starter handle must be pulled several times until the first flash occurs. This will indicate that the mixture has entered the cylinder, and the equipment is ready for the establishment. Beforehow to start a Stihl chainsaw, you must set the control lever one position up. This will open the choke while the throttle remains in the same position.
The starter needs to be pulled and started. The tool will run at high speed, the throttle will be open. To set the latter to idle mode, you should use the gas trigger and release it. The tool should now work normally. There are no additional devices on the described chainsaw model that would make it easier to start.
Recommendations for sawing MS 180 C
This device, compared to the previous one, has some differences in the trigger mechanism. However, there will be no changes in the launch algorithm. The described equipment option has a system that, using a spring in the starter of the saw, reduces the resistance of the engine.
Starting the MS 211 C-BE saw
If you, too, were among those consumers who thought about the question of how to start the Stihl chainsaw, then as an example, consider another model that was mentioned above. It features a hand pump for the feed system, making it easier to start the saw when it is cold.
The instruction contains an additional item, which indicates that before starting with a pump, it is necessary to pump fuel into the carburetor. The next step is to proceed according to the principle described formodels 180.
Starting a saw after winter
If you are faced with the question of how to start the Stihl chainsaw after winter, then you should read the recommendations. From consumer feedback, it can be understood that after a long period of inactivity, some users cannot start the equipment. For a successful launch, you need to take care of the saw in advance.
Before putting it into storage, drain the fuel, and then start the engine and burn the fuel that remains in the system. Preparation is necessary so that the membranes do not stick together during storage. This simple operation will allow you to start the saw after the winter. If you still don’t know how to start the Stihl 180 chainsaw correctly, then you should know that it will be easier to do this if you add 2 ml of fuel mixture to the cylinder through the spark plug hole before starting. You can do this with a syringe.
Saw insertion with decompression valve
Users sometimes ask how to start if the instrument has a decompression valve. The 250 does not have one. As soon as the first flash occurs, the valve will be in normal operation. The engine control lever will be set to the position when the choke is open. The launch will continue, the decompression valve must be pressed again. It does not make the launch quick, but it simplifies the process and makes it comfortable, because during the launch the operator will have to applyless effort.
If you are not quite sure that you know how to start a Stihl 180 chainsaw, then remember that equipment with a valve, regardless of whether it has a hot or cold engine, must be started using the valve. This will make it easier to crank the engine. So you can extend the life of the starter and reduce the number of broken laces, because such chainsaws have a larger cylinder volume and compression.
Review of the MC 180 chainsaw
This model of equipment costs 11,490 rubles. It is a household tool that will help to cope with the work at their summer cottage. With the help of the unit, you can get rid of unnecessary knots and cut down small trees. The control is single-lever, and due to the low weight, it is very comfortable to work with the unit.
The consumer should be aware not only of how to start the Stihl ms 180 chainsaw, but also of the technical specifications. Other highlights include a 35cm tire and a 31.8cm engine3. The volume of the oil tank is 0.15 liters. The equipment weighs 3.9 kg. The power of the model is 2 liters. with. Fuel tank capacity is 0.25L.
Review of the Stihl 250 chainsaw
You can buy models 250 at a price of 29,542 rubles. This equipment is a semi-professional model with a 40 cm tire. Power is 3.1 liters. with. or 2.3 kW. The fuel tank capacity is 0.47L.
Quite oftenconsumers before buying are wondering how to start the Stihl 250 chainsaw. This was discussed above. However, this information is not the only one that should be read before using the model. Other highlights include:
- single-lever control;
- presence of a compensator;
- anti-vibration system;
- side chain tensioner.
By purchasing this model, you will be able to carry out its quick refueling. This feature is implemented by a lid, which has a patented design. The operator, working with the equipment, will have reliable hand protection. Consumers especially highlight the notched stop, as well as the chain, which guarantees high-quality and fast sawing of wood.
Conclusion
After purchasing the equipment described in the article, you should ask how to start the Stihl chainsaw. This information will help you extend the life of your tool. After all, improper handling of it can cause rapid wear of some parts. It is especially important to know how to prepare the unit for a long downtime. This was discussed in more detail above. After reviewing this information, you will be able to understand how to prepare the device for winter storage.
Sometimes technical specifications tell some consumers about launch features. If it can help you too, then you should read them. Some of them were presented above, but their complete list is presented in the instructions, which must be supplied incomplete with equipment.
