Reviews of the "Benelli Vinci" will allow you to objectively determine the significance, features and abilities of a shotgun. It refers to innovative semi-automatic modifications that combine multiple technical achievements and the solidity of classic variations. The uniqueness of the design lies in the basic modular system, which makes it possible to disassemble the product into three parts without the use of special tools.
Barrel
Owners' reviews of the Benelli Vinci additionally confirm the nuance that the free-floating barrel of the gun aggregates into one with an inertial reloading system such as Vinci Inertia System and a bolt box.
Many users note that the weapon in question shows a stable accuracy of firing, including steel, lead pellets and bullets of a suitable caliber. A similar indicator is achieved due to the original method of mounting the stem on the same axis with the specified inertial scheme. When fired, mechanical action is transferred to a rigid block, minimizing deformation and vibration of the element.
Features
The system of the Benelli Vinci gun, which reviews are mostly positive, is activated with a single spring, which simplifies the operation of the main structure as much as possible, providing ease of maintenance, operation and increasing the efficiency of the fixture.
The barrel of the weapon is equipped with an elongated flat recoil stop moving towards the body. The entire slide sliding process is optimally configured with the warp movement. This contributes to an even distribution of interacting moments, providing perfect balance and minimal twitching when firing. Moreover, this feature applies to both single volleys and bursts of shots.
Replaceable choke nozzles and the barrel of the Vinci Black shotgun are thermally processed using the Crio System. Cryogenic finishing technology reduces the internal stress of the steel and seals the stem walls. The working part during firing heats up less than conventional analogues, while the deformation elasticity becomes lower and more stable. Another advantage of this treatment is the reduction of the frictional force of the shot, which reduces the deformation and speed characteristics of the charge. Combat is optimized, accuracy increased by 13 percent compared to competing versions in this category. Reviews of the "Benelli Vinci Black-760" additionally confirm the fact that the barrel, which has undergone cryotreatment, becomes more resistant to various influences. This significantly increases the service life of the weapon and its main parameters.
Carriage
The company's specialists have embodied a new element (carriage) in the design of the considered weapon. It includes a combination receiver and handguard, including a trigger, safety guard, locking device, reflector, rammer, return and ejection mechanism.
The front part of the gun carriage of the Benelli Vinci gun is connected to the receiver using special hooks, aggregating with a sliding cuff. The rear block is fixed by means of corrective plates for deflection. Disassembling and assembling the gun without tools means no pins or screws.
Shop
This assembly is located in front of the gun carriage. The clip is attached to the barrel with one rotational movement, which makes it possible to quickly change magazines on the hunt. In states whose law provides for the operation of only fixed clips, a special version of this weapon has been developed.
The M-245 magazine itself is equipped with a two-shot limiter. The length of the sleeves of suitable cartridges is 76 millimeters. The design of the charging socket allows you to install ammunition even when wearing gloves. The discharge of the clip is carried out by pressing the provided push-button lever. The type of trigger mechanism is designed with a focus on the requirements of the highest possible ergonomics and a comfortable position of the finger on the trigger. Variable ribbed forend with V-Grip technology for a secure grip and reduced slip.
Butt
In their reviews of the Benelli Vinci, users note that the stock of the gun is combined with the locking casing using a unique quick-release lock. It is possible to separate or replace the element in question in a few seconds, by means of a quick rotational movement.
Stock parts match the innovative ComforTech Plus type recoil leveling system. The item is equipped with 12 cutouts, which are located diagonally from the neck to the heel. Due to this feature, the butt of the gun has a high rate of elasticity, which reduces recoil during shooting. The smooth plane of the unit guarantees its free sliding on the wearer's cheek, protecting the face from mechanical damage.
The manufacturer positions the presented product as the world's fastest semi-automatic shotgun. Design features and the introduction of innovative technologies made it possible to absorb recoil as much as possible, increase the rate of fire, reduce vibration and barrel kickback. In reviews of the Benelli Vinci, users indicate that while the owners of other models point their weapons after firing, the hunter with the specified modification manages to hit the next target. The neck of the butt has a corrugated texture with polymer elements. The QuadraFit function allows you to adjust the parameters without special tools.
Technical plan parameters
Among the main characteristics, taking into account the feedback from the owners of the Benelli Vinci, you cannote the following points:
- Caliber - 12.
- Ammo used - 12/70, 12/76.
- Barrel length (in mm) - 650-700-750 mm.
- Choke types – 0/0, 25/0, 50/0, 75/1, 0.
- Clip capacity, depending on modification - 2/3/5/7/9 charges.
- Fly variation - fluorescent red model.
- Features of the buttstock - the length is 365 mm, adjustable to the right and left sides.
- Deflection at the front end of the comb - 39 mm.
- Barrel material - steel.
- Butt plate and comb made of ergonomic polyurethane and elastomer.
- Weapon weight - 3, 15 kg.
Modifications
There are several versions of the gun in question on the domestic market:
- "Benelli Vinci Black". Consumer reviews indicate the greatest popularity of this modification among hunters.
- Camo Max4 variant.
- Desert Dune model.
- Amazonia Green.
- Super Vinci.
- Benelli Cordoba.
Dismantling
This procedure requires compliance with certain rules and steps:
- Before starting disassembly, the weapon must be completely unloaded.
- Then press down on the ammunition limiter button and close the bolt.
- Activate the mounting latch, then turn the magazine cover counterclockwise.
- Disconnect the barrel module and the carriage by moving the last element forward.
- The butt is unhooked from the base by turning on90 degrees clockwise.
- Press the damper bolt plate with your thumb, releasing the upper ledge and fixing the assembly in the rear extreme position.
- Remove the reload handle, remove the shutter from the modular part.
- Remove the striker retainer, keeping the striker and spring from accidentally falling out.
- They take out a combat larva and an inertial clamp.
- The weapon is put on the fuse, after which, with the help of a punch, the trigger (trigger mechanism) is removed.
- Turn the magazine until the shape of the mounting latch button changes, then shift it, disconnect the clip.
As evidenced by the reviews of the Benelli Vinci Super, modifications with a non-removable type magazine do not require disconnecting the charger tube from the gun carriage during disassembly.
Assembly
This procedure is carried out in this order:
- Press the limiter button, mount the front part of the USM into the nest of the carriage (the trigger must be cocked). Next, the block is turned down until it is installed in its place.
- The protruding edge of the mainspring is displaced, the trigger is pressed again, placing it finally.
- USM is attached with a locking pin.
- The removable clip is placed in the carriage, paying attention to the fact that the latch retainer and its socket are in line.
- The inertial spring is placed in the compartment between the bolt body and the larva.
- After installing the last node, mount the striker with a spring, which are attached with a special pin.
- The shutter is installed incasing, then place the reload handle in the compartment to fix it on the bolt.
- The limit spring is shifted down so that the upper protrusion is embedded in its socket.
Maintenance and cleaning
Reviews of the "Benelli Vinci Super Sport" make it clear that the care of the gun must be carried out in a fully discharged state. The main service complex includes several mandatory manipulations:
- Clean the barrel after each use.
- Regular removal of carbon deposits from powder gases and foreign objects, followed by lubrication of parts.
- Processing with appropriate materials for the bolt group.
- Lubrication of external parts in active contact with the atmosphere.
- Cleaning muzzle and landing blocks, including magazine.
When servicing the gun, it is recommended to use branded accessories and oil from the Benelli manufacturer. Caring for the clip requires attention and special care, as if handled incorrectly, the spring may pop out, causing serious injury.
Store Maintenance Procedure:
- The clip is pre-discharged, modifications like M-515 or M-640 are also released from the mounting clamp.
- On non-removable versions, press the special button, moving the work tube forward until the plug latch appears.
- Unscrew the fixing screw with a 2.5mm Allen key.
- The spring will push out the limiter and plug under its influence.
- They take out the ammunition pusher, clean all the elements, fix the stopperscrew.
- A detachable clip is attached to the weapon, and on a static analog, the magazine tube is moved to its original position.
Types and types of charges
For firing from the weapon in question, cartridges with a sleeve length of 70 or 76 millimeters can be used. Attention should be paid to the fact that charges should be used that provide sufficient recoil force that does not interfere with the functioning of the automatic reloading system. At the same time, adjustment of models when firing with charges of different power is not required.
At the very beginning of the operation of a new gun, there are sometimes delays when firing low-yield cartridges. Experts advise in this case to shoot 2-3 packs of ammunition with a standard powder power indicator. Cartridges are changed manually or with the help of a cutter (for charges in the chamber). Before performing this operation, you should put the weapon on the safety and point the muzzle in a safe direction.
With a mechanical replacement, the butt rests on the thigh and the bolt is opened. As a result, the charge is removed from the barrel and thrown to the side. Then, a new ammunition is installed through the ejection socket, releasing the shutter. If a cut-off is used, the butt is also rested on the thigh, then the limiter button is pressed, shifted down. After the cartridge leaves its place and is discarded, the bolt handle is lowered, new ammunition is automatically fed into the chamber.
Reviews about "Benelli Vinci Russian North"
I would like to talk about this modification separately. Many users note that this version is not suitable for the domestic market. First, it has a decent cost. Secondly, the model needs 89 caliber steel cartridges, which are almost impossible to get in Russia, especially good quality charges. Connoisseurs recommend modifications in "black" or "khaki" colors, indicating high strength and special barrel processing. The rest of the feedback about this manufacturer is extremely positive.
