The Veresk submachine gun differs from the so-called peers in its firing range. The weapon can hit a target at a distance of up to 200 meters. In addition to the high range, the submachine gun has other powerful parameters. For example, it easily breaks through the enemy's individual armor protection.
The first development of weapons was carried out at the end of the last century, and the modernized model, which is used by the special services, was presented only in 1999.
The compact submachine gun is ideal for close combat and defense. PP is convenient in shooting with a butt, from the hands, offhand. During combat, a high density of fire is provided in a short period of time.
Pistol cartridge, which has a small amount of gas and a small muzzle velocity, makes it easier to use silencers.
Special Design Pistol Features
Experimentation on new weapons began in 1993. Since that time, the development of a new experimentaldesign work under a special code. The SR-2 Veresk submachine gun is adapted for the 9x21 cartridge. SR stands for "special development". The final version of "Heather" was adopted in 2000.
The main features of the SR-2 PP are:
- Rare automation system and bore locking assembly.
- Removal of powder gases into the gas chamber, which is located above the barrel.
- The bolt carrier is rigidly connected to the gas piston rod.
- The return spring is located in the channel of the bolt carrier.
- The bolt is equipped with six lugs.
The reload handle is located on the right side. Due to this, the size of the weapon is significantly reduced. The compensator is attached to the muzzle. The automatic box is made by cold stamping from a sheet of steel.
Design and operation of the submachine gun
The firing mechanism of the Russian Veresk submachine gun is a striker type. The fuse box is on the right. When turned on in the extreme position, the fuse blocks the trigger, and the flag blocks the groove for the passage of the reload handle. Another flag translator is placed on the left. He sets a single or regular fire. Switching the flag is done with the thumb.
The supply of cartridges comes from a direct box magazine. A feature of the store is the staggered arrangement of cartridges. When the ammunition is used up, the magazine is discarded after clicking on itlatch. The shooting process is equally comfortable for both hands.
A front sight with a fuse is installed near the muzzle of the barrel. The rear sight is designed for shooting at a distance of up to 200 meters. The automation cover is adapted for the installation of an optical or collimator sight.
The butt is made by metal stamping. It folds up and down.
The SR-2M "Veresk" submachine gun is an upgraded version of the above weapons. The fuse box has been changed in it. The SR-2M has a new muzzle device and a folding front grip on the handguard.
Tactical and technical characteristics of software SR-2M
- Weapon weight without equipment: 1650
- Length of SMG with stock retracted: 603 mm.
- Folded: 350mm.
- Barrel length: 174 mm.
- Number of grooves: 6.
- Sight range: up to 200 m.
- Magazine capacity: 20/30 rounds.
It is worth noting that a red dot sight (approximately 300 grams) and an equipped magazine are added to the weight.
Submachine gun adapted for SP10, SP11 and 7BTZ cartridges. The initial speed of the bullet depends precisely on the type of cartridge and is: in the first case - 440 m / s, in the second - 415 m / s, and in the third - 430 m / s. The SP11 cartridge is equipped with a low-ricochet bullet, and the 7BTZ cartridge is equipped with an armor-piercing tracer.
The characteristics of the Veresk submachine gun allow firing at a distance of 100-200 meters. The front sight with a fuse is located on the extreme front of the barrel. On the lid of the boxa collimator sight with a 6-o field of view is attached. Such sights are the main ones in combat at short range.
Design features of the submachine gun
The butt of the weapon is made by cold stamping of steel. The control handle and handguard are made of impact-resistant plastic. The handle is made integral with the trigger guard. A front stop is installed in front of it. The handguard covers the barrel.
For the convenience of firing from a position with outstretched arms, a front bend is designed on the trigger guard (as for shooting with a two-handed grip).
In the upgraded version, the hard stop on the handguard is replaced by a folding front handle. This feature improves the controllability of weapons and accuracy of fire. The fuse box has also been upgraded. In the new version, the muzzle device is presented in the form of a muzzle-stop. This feature allows you to protect the shooter's hand from burns by powder gases and forward displacement.
Veresk submachine gun is worn on a belt and discreetly, using a suspension that holds both a weapon and a spare magazine.
Weapon automation
The SR-2 "Veresk" SMG uses gas-operated automatics with barrel locking at the time of the shot.
The gas piston in the cylinder is located above the barrel. When fired by a piston, the bolt carrier is actuated (in which the bolt with 6 lugs is located). On the right side of the bolt carrier, the cocking handle is rigidly fixed.
It is possible to conduct automatic and single fire. The right fuse lever has 2 modes: O - fire, P - fuse. The left one performs the functions of a fire mode translator: one dot corresponds to a single shot, three dots to automatic fire.
Cartridges are fed from box magazines. The design of the Veresk submachine gun is equipped with standard open sights.
PP design with partial disassembly
The device consists of:
- From the return mechanism.
- Shutter frame.
- Guided mainspring.
- Drummer.
- Shutter.
- Handguard.
- Barrel with automatics.
- Trigger.
- Butt.
- Other surface details.
- Store.
Standard equipment consists of the following items:
- Suspension (bag for a spare clip + shoulder suspension + holster). It is used for concealed carrying.
- Belt. Designed for open carry. Length adjustable.
- Romrod (used when cleaning weapon elements).
- Bags.
- Cases.
- Other accessories for cleaning and disassembly.
Veresk submachine gun needs regular cleaning after each use. Timely care significantly increases the resource reserve and service life. Cleaning is preferably done immediately after shooting.
Improved CP-2 series
The new automation system and an unusual stock are matched toin accordance with the powerful ammunition for which the weapon is designed. Automation mechanisms of PP are reliable in adverse conditions (for example, with increased dustiness, humidity). The operating temperature range is from -50 to +50 degrees. You can also install a silencer on the PP.
When developing the guidance system, it was planned to use only mechanical and flip diopter sights. Somewhat later, a collimator sight was added to the layout of the Veresk SP-2MP submachine gun, which is the main one. The mechanical one was somewhat modified - it left one rear sight. The distance to the target is taken into account by offsetting the aiming point in height. This method is convenient for experienced shooters.
Heather ammo
The submachine gun is used in special operations forces. In view of this, the weapon has been adapted to various types of 9×21 mm supplies:
- SP10 - with a steel bullet of increased armor penetration. This type of ammunition strikes the enemy's manpower at a distance of up to 200 meters, and is also capable of harming individual armor protection equipment.
- SP11 - the ammunition was created using a lead core.
- SP12 - a cartridge with an expansive bullet. It provides increased stopping power.
- SP13 - supplies with a tracer bullet.
According to experts, the damaging effect of the cartridges of the Veresk submachine gun is up to three times higher than that of PM 9×18 mm supplies, and 2 times higher than that of 9×19 mm.
Pros and consweapons
Among the advantages are:
- High firepower.
- Firing accuracy.
- High damaging effect at close range.
- Light weight.
- Convenient design.
- Spacious store.
- Convenient layout.
- Good aiming system.
- Possibility to use different cartridges.
Flaws are:
- Poor quality of some samples.
- Some parts are not interchangeable.
- Frequent faults.
The advantages and disadvantages of the Veresk submachine gun allow us to determine the necessary amount of work to further improve the weapon.
Safety when handling weapons
- When receiving, be sure to check the loading of the firearm.
- It is forbidden to direct the muzzle towards people and animals.
- Any weapon should be considered loaded until checked.
- When retracting the bolt, the barrel is directed directly at the target or in a safe direction. In this case, the possibility of ricochet should be taken into account.
- Outside of the fire mode, it is forbidden to put your finger on the trigger.
- Check the barrel for foreign objects before use.
- When firing in a position with outstretched arms, the grip must be such that the bolt does not injure the hand.
- Required item is a briefing before class.
- In the fire zone, as well as during the transportation of the actionstart and stop at the command of the leader.
Safety in the fire zone
When shooting is prohibited:
- Admit to arms persons who have not passed the safety test and are unfit for he alth reasons.
- Make operations with weapons without the permission of the commander (load, fire, etc.).
- Leave personal equipment unattended and pass it on to third parties.
- Use the wrong ammo.
- Use personal devices (such as a telephone) in the fire sector.
- Fix equipment with weapons in hand.
- Allow persons under the influence of alcohol or drugs, strangers.
- Disassemble and repair ammunition.
The Veresk submachine gun is a powerful and effective modern weapon. Photos allow you to evaluate its compactness and correct layout. It should be remembered that with any use of firearms, safety precautions should be followed. Also, you can not ignore the rules of care, transportation and storage.
